GetPaper Blog

  • Avoiding These Storage Mistakes Can Help Your Vinyl Paper Rolls Stay Fresh

    Most of today's architectural and engineering offices average 3,500 square feet per month of printing output. That being said, these offices typically keep a large volume of paper on standby to keep up with this output. However, storing vinyl paper rolls properly is integral to preserving the quality of the paper before it's used. Here are just a few mistakes to avoid if you want to keep your vinyl paper rolls and other engineering paper as fresh as possible.

    Not preventing contact with water/moisture.

    As is the case with most types of paper, it's critical to store your vinyl paper rolls in a dry place, where there's virtually no risk of them being susceptible to water damage. This can completely diminish the value and structural integrity of your vinyl paper and essentially render it useless. And of course, never try to use or print on paper that has been damaged by any kind of water or moisture -- you won't be doing your equipment any favors.

    Not storing your paper at the proper temperature.

    Some people don't realize it, but the temperature can actually make a big difference in your paper's viability, durability, and overall quality. When in doubt, cooler temperatures are usually better. Experts say your vinyl paper rolls should never be stored at a temperature above 75 degrees -- this is about the temperature that starts to speed up the process of the paper's adhesive dehydration, putting a limit on its lifespan and strength. Similarly, you should never keep the paper is prolonged direct sunlight.

    Putting pressure on the surface of the paper.

    Finally, it's important to avoid putting a large amount of pressure onto the surface of the paper. This is an easy mistake to make, as it's only natural to want to save space by stacking rolls on top of one another. But doing so can cause something called mottling, where a mark of pressure becomes visible and compromises the visual appeal of the paper. Store your rolls vertically, where there's much less pressure.

    Ultimately, avoiding these mistakes is the best way to store your paper to preserve its quality. For more information about engineering bond paper rolls, contact Get Paper.

  • Stop Wasting Valuable Printer Ink With These Smart Tips

    There's no denying the increase in efficiency and sustainability the paper industry has seen in recent years. In fact, the U.S. paper recovery rate reached an all-time high of 67.2% in 2016, the third consecutive annual increase. However, the same can't be said about wide format printer ink -- experts say this is one of the highest expenses for printing offices, and customers are also prone to scam purchases when they buy ink. Fortunately, there are a number of quick tips you can take advantage of that will help to save your office on valuable printing expenses. Here are just a few tips that can help you think about your ink and save on printing costs.

    Use Smaller Font

    This may not be an option with all documents and printouts, but attempting it whenever possible can eventually make a noticeable difference and save your business on valuable ink and printing expenses. Using a smaller font and smaller graphics/images can preserve the quality and the integrity of what's being printed while keeping more ink in the printer. Similarly, there is a large list of fonts that are designed to save ink, like EcoFont, so think about using one of those options when possible as well -- you'll definitely notice a difference.

    Push Your Printer

    Many printers tend to exaggerate when it comes to alerting the user when it's running low on ink. If you see the 'low ink' warning, don't take it at face value -- push your printer a bit further.

    "You may have more ink left in your cartridge than your printer realizes. It may tell you that your ink and toner are empty. In reality, you could have as much as 30% more life left. Keep printing until you see the ink start to run out on the page," writes Kim Komando on Fox News.

    Buy the Right Ink (And Paper)

    Finally, make sure to invest in high-quality ink and paper rolls. Engineering bond paper comes in different sizes and types, and using the most efficient options for your printer, e.g., 36 inch paper rolls and other plotter paper, can truly optimize the printing process.

    The global market for wide format printers is projected to reach $7.2 billion by the year 2022. Understanding how to save on printer ink is always a financially wise investment. For more information about 36 inch paper rolls, vinyl paper rolls, and other types of engineering bond paper in bulk, contact Get Paper.

  • Using Mylar Paper? Here's What You Need to Know

    It may seem like the inherent purpose of paper is slowly becoming obsolete, but that is far from the case. In fact, the U.S. paper recovery rate reached an all-time high of 67.2% in 2016, the third consecutive annual increase, and there are countless different types of paper made with unique materials that have distinct purposes in many industry sectors. Mylar paper, for example, is a specialized type of paper with many one of a kind purposes. Here's a quick FAQ to help you understand more about Mylar paper.

    What is Mylar paper used for?

    First, Mylar paper is made from a blend of materials that make it both durable and flexible for a number of commercial uses. It's most traditionally used for packing materials, but it's being expanded for use in the solar technology industry as well as for electrical insulation. Perhaps most interested is the fact that the United States Library of Congress uses Mylar paper in order to preserve some of the nation's most essential documents and records. The paper, which is more like a film, is transparent and able to resist moisture and oils. With Mylar paper, documents can be preserved perfectly while remaining legible.

    What is Mylar paper made from?

    Mylar paper is very durable, so it shouldn't come as a big surprise that it's made from a polyester film called BoPET (Biaxially-oriented polyethylene terephthalate). As mentioned, the durability and tensional strength of Mylar paper allow it to be stretched for a period of time without ripping or tearing.

    What are some different types of Mylar paper?

    Paper brightness measures the amount of reflectance of a specific wavelength of blue light. Brightness is measured on a scale of zero to 100. The higher the number, the brighter the paper. Mylar paper, however, is completely transparent and reflects the light it absorbs. Mylar paper is readily available in multiple varieties, including both coated and uncoated. It also comes in many different sizes and widths.

    Ultimately, understanding the basic info about Mylar paper can help you determine your specific needs when it comes to 36 x 500 bond paper and other engineering bond paper in bulk. For more information about 36 x 500 bond paper or plotter paper rolls, contact Get Paper.

  • Engineer's Guide to Paper Conservation

    plotter paper rollsPaper is a staple in countless industries, and fortunately, its production and recycling processes are becoming more efficient. In fact, the U.S. paper recovery rate reached an all-time high of 67.2% in 2016, the third consecutive annual increase. And if you're considering investing in plotter paper rolls or any other type of bulk engineering paper for sale, you should know that you, too, can help to improve the efficiency process. Here are just a few ways you can save on plotter paper rolls.

    Keep your eye on the printer.

    The global market for wide format printers is projected to reach $7.2 billion by the year 2022. If you're printing a project and notice an error after you hit 'print,' try to cancel the printing job before the rest of the pages print. Then, reprint only the page or pages that had an error -- after you correct them, of course. This helps to conserve paper and avoid paper waste.

    Re-use wasted paper.

    "Wait, what?" Yes, it's true -- there's a brilliant method to reprint information for personal use with a technique called 'duplex printing.' This technique isn't ideal for documents you'll be sending out to clients, but it's perfect for documents used for internal use.

    "This may mean setting up for a two-sided print job (sometimes called "duplex printing"). This can also mean putting a new print job on the reverse of old paper. Fill the paper tray with old mistaken printings. After it is finished printing, flip your document over to the wrong side and mark a line through it, so that in the future you won’t waste time reading the wrong side," writes Laureen Miles Brunelli on The Balance Careers.

    Shred scrap paper.

    Americans recycle more paper products than they send to landfills. The U.S. paper industry set a goal of a 60% scrap paper recovery rate by 2012 but achieved this goal three years early. Your office is bound to have some leftover scrap paper. If all else fails, you can shred your scrap paper and use it for packing material for shipping.

    Ultimately, understanding how to optimize your office paper use can help you save money and materials. For more information about plotter paper rolls, contact Get Paper.

  • How to Make Your Own Blueprint Paper: a DIY Guide

    blueprintsMost of today's architectural and engineering offices average 3,500 square feet per month of printing output. Most of these offices use blueprints for countless everyday projects and designs. And while it's typically best to buy your blueprints paper from a reputable supplier, it's possible to create it yourself using a fascinating chemical process. Here's a quick rundown of the DIY blueprint creation process.


    For this project, you'll need 15 mL of 10% potassium hexacyanoferrate(III) (potassium ferricyanide) and 15 mL of 10% iron(III) ammonium citrate solution. You'll also need a petri dish, tongs, white paper, and a small, opaque object such as a key or a coin.


    This process must be completed in the dark or in a very dim room. Start by combining the potassium ferricyanide and the iron(III) ammonium citrate solutions in the petri dish. Stir slightly to mix, then drag a sheet of paper across the top of the dish with the tongs to cover it. Let it dry completely, in the dark, coated side up. It's important to make sure it doesn't get exposed to light.

    When the image is ready to be captured, overlay the ink drawing on tracing paper or clear plastic, or use an opaque object before exposing the blueprint paper to direct sunlight. Let the paper develop in the sunlight for around 20 minutes, cover the paper again, and return to the darkroom to rinse the paper thoroughly and complete the process. Rinsing is an integral component of the process, and skipping this step could ruin the image.

    "Thoroughly rinse the blueprint paper under cold running water. It's fine to have the lights on. If you do not rinse away any unreacted chemicals, the paper will darken over time and ruin the image. However, if all the excess chemicals are rinsed away, you'll be left with a permanent colorfast image of your object or design," writes Anna Marie Helmenstine on ThoughtCo.

    The 2016 Survey of Architectural Registration Boards reported that there are 109,748 architects in the United States, and while this is a fascinating DIY project, it's best to buy blueprints and other engineering paper from a reputable supplier to ensure the highest possible quality and performance. For more information about bulk engineering paper, contact Get Paper.

  • 4 Tips for Proper Storage of Your Plotter Vinyl Rolls

    plotter vinyl rollsYour plotter vinyl rolls are essential for your job, and you want to make sure you store them correctly. Improper storage can lead to serious frustration in the long run. Here are some tips to help you properly store your vinyl paper rolls.

    Establish ideal storage temperature

    One of the first things you should do when storing your plotter vinyl rolls is make sure the storage temperature is at or below 75 degrees Fahrenheit. Storage temperatures above 75 degrees Fahrenheit accelerate adhesive degradation. They can also reduce the bond of your graphics significantly after a year or two. Keep the plotter paper rolls in the coolest part of your shop or warehouse to assure that they are in good shape when you need them.

    Avoid excess humidity and water contact

    Paper and moisture don't mix well, and you probably know that. Excessive humidity or even outright water contact will damage all your paper and paper-based release liners. If you're lucky, any unprotected product might wick off the moisture along the cut edge, develop waviness, and become difficult to manage when in use. Worse case scenario, though, is that your vinyl paper rolls will be completely ruined and unusable.

    Avoid surface pressure

    Extreme pressure on any surface of your paper rolls will result in surface marring, also known as mottling. It can completely ruin a roll of vinyl paper. This is especially true if you've stacked multiple rolls on top of each other, or if a roll has rested on its side for an extended period of time. Vinyl is soft enough to take a pressure mark, depending on the finish (matte versus gloss). You should store your plotter vinyl rolls vertically instead of horizontally because there is far less pressure when the rolls are vertical.

    Inventory management

    Finally, when you're storing your paper rolls, you should keep in mind that it's a good idea to know what you have on hand at all times. If you can't really see what you have or how much is left on a roll, it's more likely to sit around for a long time. You will also probably shuffle it around a lot in that time, which isn't good. Take the time to label partial boxes or protective bags so you know what you have in storage.

    The very first plotter was invented in 1953. If you're using one of these amazing machines, you need plotter paper. To properly store your plotter paper, follow these tips listed above. It can save you a lot of money and frustration from ruined vinyl paper.

  • Tyvek Paper 101: A Short Beginner's Guide

    engineering paperThe 2016 Survey of Architectural Registration Boards reported that there are 109,748 architects in the United States. Many of them work with an engineering paper called Tyvek paper. Invented in 1955 by DuPont researcher Jim White, Tyvek is a material that looks like paper but behaves like plastic, making it ideal for a number of creative uses. Here are just a few practical uses for Tyvek paper.

    Housing Wrap

    One of Tyvek paper's most popular uses is in the form of Tyvek housing wrap, which protect homes and buildings from weather damage during construction and certain renovations. Tykvek paper is both waterproof and permeable, so it's the perfect material to protect buildings from the elements.

    Medical Packaging

    Interestingly enough, Tyvek is quickly becoming the packaging material of choice for countless medical supply manufacturers. This is because of its feel and waterproofing qualities. It's continuing to replace paper and plastic within these contexts.

    "[Tyvek] is a lightweight material that makes it great for use in envelopes and packaging, because it's easier to ship and move. It is slightly thin, allowing water vapor to pass through it, but not liquid water. It is also tough for its thickness and weight, which means it can stand up to some abuse," writes Mike Orwell on Sciencing.


    Surprisingly, a few countries have experimented by using Tyvek paper for some governmental purposes. Costa Rica, for example, printed money on the material, which outlasted its paper alternative. New Zealand is also known to have printed its drivers' licenses on Tyvek material between the years of 1986 and 1999.

    Ultimately, these are just a few of Tyvek paper's many uses and applications. Keep in mind that this material can certainly be recycled, though not with the rest of your paper. The U.S. paper industry set a goal of a 60% scrap paper recovery rate by 2012, but achieved this goal three years early. However, since Tyvek is actually a type of plastic, it should be recycled with the rest of your plastic bottles and materials. There are also some companies that can pick up the material through certain recovery programs.

    If you're in need of any bulk engineering paper or bond paper rolls, contact Get Paper. We can help you find the perfect material for your upcoming project.

  • Exploring the Top Benefits of Printing With Vinyl Paper

    Not many people think of vinyl as a paper material, but it is. In fact, vinyl paper rolls serve a number of important functions. Most of today's architectural and engineering offices average 3,500 square feet per month of printing output, and vinyl paper rolls are ideal for a number of printing applications. Here are just a few advantages of printing with 36 inch plotter paper made with vinyl.

    Lightweight and Durable

    First and foremost, vinyl paper is known for being highly versatile in regards to its wide range of printing applications. While it's primarily used for practical purposes, it can also be used creatively for wallpaper and other household decor. With vinyl paper, you can print just about anything -- your business's name, logo, or any other design -- and use it to enhance your store presence. While other types of paper wouldn't last in these applications, vinyl paper is both lightweight and durable, making it perfect for commercial applications.

    Easy to Transport

    The delicacy of some types of paper makes them difficult to handle and transport without causing damage. Vinyl paper, however, is conveniently sold in rolls. Plotter paper roll widths are expressed in inches. Common roll widths for wide-format plotters include 11, 17, 18, 22, 24, 30, 34, 36, and 42 inches. But with vinyl paper rolls, there's virtually zero risk of causing serious damage during transportation.


    Finally, vinyl paper is a practical choice that adds a professional look to any setting. Other types of paper get damaged easily in the weather; they can rip, tear, wrinkle, and become unsightly. Invest in the integrity of your printed materials by using vinyl to ensure that their quality is protected.


    Americans recycle more paper products than they send to landfills. The U.S. paper industry set a goal of a 60% scrap paper recovery rate by 2012, but achieved this goal three years early. With that in mind, vinyl paper is also known for being a 'green' option that's sustainable due to the minimal waste created when the manufacturing and printing process is complete.

    When all is said and done, vinyl paper rolls are ideal for countless practical and creative applications. Vinyl paper is a durable, lightweight, professional, versatile, and even sustainable option for any office. For more information about 36 inch plotter paper rolls, contact Get Paper.

  • Interested in Photography? Get to Know Your Papers

    blueprintIf you're interested in photography, you need to understand the type of paper you use to display your prints. If you're trying to use blueprint papers or common printing paper to display your prints, you're going to have a rough time creating a beautiful image. Having a basic understanding of how the chemical process works on the types of paper you use is essential to creating the most beautiful prints you can.

    What is photographic paper?

    Photographic paper is essentially a cut of paper -- usually from large 36 inch paper rolls -- that has been coated with a chemical that is sensitive to light. It has the ability to capture an image once it has been projected to form an image onto the paper through a negative. Sometimes, latent exposure is used, but it doesn't always have to be.

    Photographic paper is primarily used for, well, photographs. The chemical coating affects the finish of the paper, making it different from your average blueprint paper. The finish will make the paper difficult to write on unless you have a marker or ink pen.

    Understanding the process

    The chemical, light-sensitive coating on the paper is known as the emulsion. It usually is made up of silver halides that are held by a thin gelatin layer. The silver halide crystals contain the key to developing an image. When these crystals are exposed to light, that's when through trace elements such as sulfur, the print can increase the light sensitivity, creating a starker photographic print. Once the chemicals are exposed to light, the photo develops. You can stop crystal development through a chemical bath.

    What makes it different from other paper?

    Coated paper differs from vinyl paper rolls or blueprint paper. Coated paper offers a smooth surface coating that ranges from matte to a high gloss finish. Types of bond paper will have a rough texture since there is little to no surface coating present. The coating on the paper will also make photographic paper quite a bit heavier than regular bond paper simply due to the additional coating of chemicals, even when the papers are similar in thickness.

    Now that you have a basic understanding of photographic paper, you can order the right paper from your local manufacturer. Keep in mind that paper roll widths are cut and marked by inches when you order yours today. Consider contacting for all your coated paper needs.

  • The 4 Types of Paper Finishes

    bond paperThere are multiple ways you can order your paper and numerous styles to choose from. You can purchase vinyl paper rolls, plotter paper rolls, engineering bond paper, blueprint paper, 36 inch paper, and more.

    However, not every type of paper is the same, and there are various ways you can order a certain type. If you need, you can get your paper coated. Each level will correspond to how much coating is applied to the paper type. You can get uncoated, matte, gloss, and UV gloss paper.

    Uncoated Paper

    Uncoated refers to 0% coating, meaning there is no coating applied whatsoever. That means the paper is dry and porous and has no glare on the surface. Uncoated paper is ideal for printing projects that require a lot of text or items that will need to be read. In terms of writing, uncoated paper presents the best option since it will prevent smudging and can be written on with a large assortment of different types of pens and pencils. Traditional stock bond paper is uncoated.

    Matte Coated Paper

    Matte coating refers to 25% coating, which gives the paper a light gloss. This gives a contrast boost to printed photos without much glare. In fact, the glare of matte coated paper is almost as non-existent as that of uncoated paper. However, matte provides a smoother finish than uncoated paper, yet softer than that of gloss coating. Those who want to enhance the visual design of their print, but have a toned-down layout and color scheme, often choose matte coating.

    Gloss Coated Paper

    A gloss coating has a 50% coating percentage, giving it a lot of shine. Gloss paper gives printed content high contrast and emphasizes color to a higher degree than paper with a light coating. For projects that require the images and colors to jump off the page, gloss paper provides a professional presentation that makes color and images stand out.

    UV Gloss Coated Paper

    A UV gloss coating is double the coating percentage of regular gloss, with 100% coating. It has all of the same characteristics as gloss coated paper, yet substantially increased. The shine and glare of UV gloss coated paper is much more significant than the other coating types and can be ideal for marketing materials.

    While some places are promoting a paperless work environment, they forget to note that more than one-third of new paper is manufactured using recycled fiber. So whether you want UV gloss, gloss, matte, or uncoated bond paper, you can rest easy knowing it is done with an eco-friendly state of mind.

    Call us today to discuss your paper needs and what we can do for you.

11-20 of 32